dotfiles/.config/ranger/rifle.conf

194 lines
8.8 KiB
Plaintext
Raw Normal View History

2022-12-07 10:39:14 +01:00
# vim: ft=cfg
#
# This is the configuration file of "rifle", ranger's file executor/opener.
# Each line consists of conditions and a command. For each line the conditions
# are checked and if they are met, the respective command is run.
#
# Syntax:
# <condition1> , <condition2> , ... = command
#
# The command can contain these environment variables:
# $1-$9 | The n-th selected file
# $@ | All selected files
#
# If you use the special command "ask", rifle will ask you what program to run.
#
# Prefixing a condition with "!" will negate its result.
# These conditions are currently supported:
# match <regexp> | The regexp matches $1
# ext <regexp> | The regexp matches the extension of $1
# mime <regexp> | The regexp matches the mime type of $1
# name <regexp> | The regexp matches the basename of $1
# path <regexp> | The regexp matches the absolute path of $1
# has <program> | The program is installed (i.e. located in $PATH)
# env <variable> | The environment variable "variable" is non-empty
# file | $1 is a file
# directory | $1 is a directory
# number <n> | change the number of this command to n
# terminal | stdin, stderr and stdout are connected to a terminal
# X | $DISPLAY is not empty (i.e. Xorg runs)
#
# There are also pseudo-conditions which have a "side effect":
# flag <flags> | Change how the program is run. See below.
# label <label> | Assign a label or name to the command so it can
# | be started with :open_with <label> in ranger
# | or `rifle -p <label>` in the standalone executable.
# else | Always true.
#
# Flags are single characters which slightly transform the command:
# f | Fork the program, make it run in the background.
# | New command = setsid $command >& /dev/null &
# r | Execute the command with root permissions
# | New command = sudo $command
# t | Run the program in a new terminal. If $TERMCMD is not defined,
# | rifle will attempt to extract it from $TERM.
# | New command = $TERMCMD -e $command
# Note: The "New command" serves only as an illustration, the exact
# implementation may differ.
# Note: When using rifle in ranger, there is an additional flag "c" for
# only running the current file even if you have marked multiple files.
#-------------------------------------------
# Websites
#-------------------------------------------
# Rarely installed browsers get higher priority; It is assumed that if you
# install a rare browser, you probably use it. Firefox/konqueror/w3m on the
# other hand are often only installed as fallback browsers.
ext x?html?, has vimb, X, flag f = vimb -- "$@"
ext x?html?, has luakit, X, flag f = luakit -- "$@"
ext x?html?, has qutebrowser, X, flag f = qutebrowser -- "$@"
ext x?html?, has firefox, X, flag f = firefox -- "$@"
ext x?html?, has chrome, X, flag f = chrome -- "$@"
ext x?html?, has chromium, X, flag f = chromium -- "$@"
ext x?html?, has links, terminal = links "$@"
ext x?html?, has lynx, terminal = lynx -- "$@"
ext x?html?, has w3m, terminal = w3m "$@"
#-------------------------------------------
# Misc
#-------------------------------------------
# Define the "editor" for text files as first action
mime ^text, label editor = ${VISUAL:-$EDITOR} -- "$@"
mime ^text, label pager = "$PAGER" -- "$@"
!mime ^text, label editor, ext xml|json|csv|tex|py|pl|rb|js|sh|php = ${VISUAL:-$EDITOR} -- "$@"
!mime ^text, label pager, ext xml|json|csv|tex|py|pl|rb|js|sh|php = "$PAGER" -- "$@"
ext 1 = man "$1"
ext s[wmf]c, has zsnes, X = zsnes "$1"
ext s[wmf]c, has snes9x-gtk,X = snes9x-gtk "$1"
ext nes, has fceux, X = fceux "$1"
name ^[mM]akefile$ = make
#--------------------------------------------
# Code
#-------------------------------------------
ext py = python -- "$1"
ext pl = perl -- "$1"
ext rb = ruby -- "$1"
ext js = node -- "$1"
ext sh = sh -- "$1"
ext php = php -- "$1"
#--------------------------------------------
# Audio without X
#-------------------------------------------
mime ^audio|ogg$, terminal, has mpv = mpv -- "$@"
mime ^audio|ogg$, terminal, has mplayer = mplayer -- "$@"
ext midi?, terminal, has wildmidi = wildmidi -- "$@"
#--------------------------------------------
# Video/Audio with a GUI
#-------------------------------------------
mime ^video|audio, has mpv, X, flag f = mpv --geometry=1000x560 -- "$@"
mime ^video, has mpv, X, flag f = mpv --fs -- "$@"
mime ^video, has mplayer, X, flag f = mplayer -- "$@"
mime ^video, has mplayer, X, flag f = mplayer -fs -- "$@"
mime ^video|audio, has vlc, X, flag f = vlc -- "$@"
#--------------------------------------------
# Video without X:
#-------------------------------------------
mime ^video, terminal, !X, has mpv = mpv -- "$@"
mime ^video, terminal, !X, has mplayer = mplayer -- "$@"
#-------------------------------------------
# Documents
#-------------------------------------------
ext pdf, has zathura, X, flag f = zathura -- "$@"
ext pdf, has mupdf, X, flag f = mupdf "$@"
ext docx?, has catdoc, terminal = catdoc -- "$@" | "$PAGER"
ext sxc|xlsx?|xlt|xlw|gnm|gnumeric, has gnumeric, X, flag f = gnumeric -- "$@"
ext sxc|xlsx?|xlt|xlw|gnm|gnumeric, has kspread, X, flag f = kspread -- "$@"
ext pptx?|od[dfgpst]|docx?|sxc|xlsx?|xlt|xlw|gnm|gnumeric, has libreoffice, X, flag f = libreoffice "$@"
ext djvu, has zathura,X, flag f = zathura -- "$@"
ext djvu, has evince, X, flag f = evince -- "$@"
ext epub, has ebook-viewer, X, flag f = ebook-viewer -- "$@"
ext mobi, has ebook-viewer, X, flag f = ebook-viewer -- "$@"
#-------------------------------------------
# Image Viewing:
#-------------------------------------------
mime ^image/svg, has inkscape, X, flag f = inkscape -- "$@"
mime ^image/svg, has display, X, flag f = display -- "$@"
mime ^image, has sxiv, X, flag f = sxiv -a -r -- "$@"
mime ^image, has pqiv, X, flag f = pqiv -- "$@"
mime ^image, has feh, X, flag f = feh -- "$@"
ext xcf, X, flag f = gimp -- "$@"
#-------------------------------------------
# Archives
#-------------------------------------------
# avoid password prompt by providing empty password
ext 7z, has 7z = 7z -p l "$@" | "$PAGER"
# This requires atool
ext ace|ar|arc|bz2?|cab|cpio|cpt|deb|dgc|dmg|gz, has atool = atool --list --each -- "$@" | "$PAGER"
ext iso|jar|msi|pkg|rar|shar|tar|tgz|xar|xpi|xz|zip, has atool = atool --list --each -- "$@" | "$PAGER"
ext 7z|ace|ar|arc|bz2?|cab|cpio|cpt|deb|dgc|dmg|gz, has atool = atool --extract --each -- "$@"
ext iso|jar|msi|pkg|rar|shar|tar|tgz|xar|xpi|xz|zip, has atool = atool --extract --each -- "$@"
# Listing and extracting archives without atool:
ext tar|gz|bz2|xz, has tar = tar vvtf "$1" | "$PAGER"
ext tar|gz|bz2|xz, has tar = for file in "$@"; do tar vvxf "$file"; done
ext bz2, has bzip2 = for file in "$@"; do bzip2 -dk "$file"; done
ext zip, has unzip = unzip -l "$1" | less
ext zip, has unzip = for file in "$@"; do unzip -d "${file%.*}" "$file"; done
ext ace, has unace = unace l "$1" | less
ext ace, has unace = for file in "$@"; do unace e "$file"; done
ext rar, has unrar = unrar l "$1" | less
ext rar, has unrar = for file in "$@"; do unrar x "$file"; done
#-------------------------------------------
# Flag t fallback terminals
#-------------------------------------------
# Rarely installed terminal emulators get higher priority; It is assumed that
# if you install a rare terminal emulator, you probably use it.
# gnome-terminal/konsole/xterm on the other hand are often installed as part of
# a desktop environment or as fallback terminal emulators.
mime ^ranger/x-terminal-emulator, has st = st -e "$@"
mime ^ranger/x-terminal-emulator, has kitty = kitty -- "$@"
mime ^ranger/x-terminal-emulator, has sakura = sakura -e "$@"
mime ^ranger/x-terminal-emulator, has urxvt = urxvt -e "$@"
mime ^ranger/x-terminal-emulator, has xterm = xterm -e "$@"
#-------------------------------------------
# Misc
#-------------------------------------------
label wallpaper, number 11, mime ^image, has feh, X = feh --bg-scale "$1"
label wallpaper, number 12, mime ^image, has feh, X = feh --bg-tile "$1"
label wallpaper, number 13, mime ^image, has feh, X = feh --bg-center "$1"
label wallpaper, number 14, mime ^image, has feh, X = feh --bg-fill "$1"
# Define the editor for non-text files + pager as last action
!mime ^text, !ext xml|json|csv|tex|py|pl|rb|js|sh|php = ask
label editor, !mime ^text, !ext xml|json|csv|tex|py|pl|rb|js|sh|php = ${VISUAL:-$EDITOR} -- "$@"
label pager, !mime ^text, !ext xml|json|csv|tex|py|pl|rb|js|sh|php = "$PAGER" -- "$@"
# The very last action, so that it's never triggered accidentally, is to execute a program:
mime application/x-executable = "$1"